No results were found for the filter!
Chain tension adjuster set
Chain tensioner set specially developed for extreme off-road conditions and supermoto use to avoid potential breakdowns and DNF's. • Robust design, 20% more material at the failure point compared to the original part - Replaces KTM /...
€70.80
ClubSport Brake lever, short with foldable pivot
ClubSport brake lever, short with foldable pivot, 25 mm / 25 position reach adjustability • Lever designed for ergonomic 2- 3 finger operation with excellent grip, optimal modulation and maximum control • Up to 25 mm / 25 position reach...
€85.00
ClubSport clutch lever, short with foldable pivot
ClubSport clutch lever, only suitable for Brembo fittings in short and foldable, 25 mm / 25 positions adjustable reach • Lever is designed for ergonomic 2- 3 finger operation with excellent grip, optimal modulation and maximum control •...
€85.00
ClubSport spare lever blade - Short
ClubSport spare lever blade - Short for foldable brake levers • CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Black stainless-steel hardware (Tighten to 6 Nm and use 243 Loctite)...
€28.20
ClubSport spare lever blade - Short
ClubSport spare lever blade - Short for foldable brake & clutch levers • CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Black stainless-steel hardware (Tighten to 6 Nm and use 243...
€30.60
ClubSport XS Brake lever, short with foldable...
ClubSport XS brake lever, short with foldable pivot, 25 mm / 25 position reach adjustability • Lever designed for ergonomic 1-2 finger operation with excellent grip, optimal modulation and maximum control • Up to 25 mm / 25 position...
€80.00
ClubSport XS clutch lever, short with foldable...
ClubSport XS clutch lever, only suitable for Brembo / Braktec fittings in short and foldable, 25 mm / 25 positions adjustable reach • Lever is designed for ergonomic 1-2 finger operation with excellent grip, optimal modulation and...
€80.00
Crash / slider pads - fork
Race track proven crash pads, specifically designed to protect front forks. • Sturdy crash-proven design • Made from abrasion-resistant Polyamide PA6 material and high-tensile 6082 grade, heat-treated Aluminium • Anodized in black ,blue...
€44.49
Crash / slider pads - swingarm
Race track proven crash pads, specifically designed to protect expensive swingarms • Sturdy crash-proven design • Made from abrasion-resistant Polyamide PA6 material and high-tensile 6082 grade, heat-treated Aluminium • Conical design...
€52.32
Enduro / Supermoto foot pegs
Very sturdy but lightweight Aluminium foot pegs that come with 2 sets of Stainless-steel bolted inserts. • CNC machined from high-tensile 7075 grade, heat-treated billet Aluminium • Hard-anodized in black, blue, orange • Supplied with 2...
€162.41
generator cover screw
• Generator cover screw CNC machined from high-strength aluminum • Anodized in black or orange You will receive: • 1x generator cover screw • 1x O-ring We have you covered. • First class pre-& after sales support • 2-year EU-conform...
€18.00
Mirror set for M10 x 1,25 mm thread
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Laser etched MG Biketec logo • Extremely lightweight • Stainless-steel hardware What do you get. • 1x mirror set incl. M10 x 1,25 mm...
€149.00
Mirror set for M10 x 1,25 mm thread
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Laser etched MG Biketec logo • Extremely lightweight • Stainless-steel hardware What do you get. • 1x mirror set incl. M10 x 1,25 mm...
€149.00
Mirror set for M10 x 1,25 mm thread
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Laser etched MG Biketec logo • Extremely lightweight • Stainless-steel hardware What do you get. • 1x mirror set incl. M10 x 1,25 mm...
€149.00
Oil filler cap
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Directly replaces the original plastic part • Anodized in black, blue and orange • Laser etched MG Biketec logo • Extremely lightweight • Wire-lock-ready for...
€20.60
Paddock stand bobbins / spools M10 x 1,5 mm thread
Lightweight Aluminium swingarm bobbins / cotton reels for paddock stands • CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Installs directly into the swingarm thread • Anodized in black, gold, blue, red,...
€15.26
Reservoir cover - clutch
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Directly replaces original plastic parts • Anodized in black and orange • Laser etched MG Biketec logo • Extemely lightweight • Incl. Stainless-steel bolts What...
€20.71
Reservoir cover - front brake
• CNC milled from high-tensile 6082 grade, heat-treated billet Aluminium • Directly replaces original plastic parts • Anodized in black and orange • Laser etched MG Biketec logo • Extremely lightweight • Incl. Stainless-steel bolts What...
€28.34
Reservoir cover - rear brake
• CNC milled from high-tensile 6082 grade, heat-treated billet Aluminium • Directly replaces original plastic parts • Anodized in black and orange • Laser etched MG Biketec logo • Extremely lightweight What do you get. • 1x reservoir...
€31.60
Supermoto / SM slider set in black
Supermoto / SM slider set • CNC milled from high-strength PA6 polyamide plastic • High strength, excellent sliding properties • Stainless steel bolts • Only suitable for MG Biketec foot pegs What do you get. 2x slider blocks 4x M5 x 8 mm...
€29.43
Supermoto mirror SET LR Type 2 black
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Laser etched MG Biketec logo • Extremely lightweight • Stainless-steel hardware What do you get. • 1x mirror set • Each mirror comes...
€118.80
Supermoto mirror SET LR Type 2 black
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Laser etched MG Biketec logo • Extremely lightweight • Stainless-steel hardware What do you get. • 1x mirror set • Each mirror comes...
€118.80
Tail tidy - Fender eliminator - License plate...
• Short, compact, and stylish license plate holder with turn signal mount • 950 g weight savings • Fully adjustable license plate angle • CNC-machined aluminum construction • Durable matte black anodized finish • Compatible with original...
€109.50
Top seller
Viewed